3/13/2019 · HSCLA29A The RMC command issued to partition failed . The partition command is: migmgr -f find_devices -t vscsi … The RMC return code is: 0 The OS command return code is: 69… GPN _FT failed for wwpn WWPN > GPN _FT failure: cmd_rsp_code: 0x8001…
The detailed error will show messages similar to below: domain_id for fscsi0 is: 3 GPN _FT failed for wwpn c0507605e4420003 GPN _FT failure: cmd_rsp_code: 0x8001 reason_code: 0x9 reason_code_exp: 0x7 Target reject command 4 flags 2 fscsi0 is zoned such that it does not have access to the same target ports as the source domain_id for fscsi1 is: 99 ERROR: Source has mapped port.
If the adapter has been replaced then zoning has to be done. Check if the adapter is getting discovered or not. If it is not getting discovered then try to reseat thhe adapter and check. You should be able to check the WWPN in the BIOS or the ILO. If the card is detecting along with the WWPN then check by updating the driver and firmware of the card.
9/25/2014 · HSCL400A There was a problem running the VIOS command. HSCLA29A The RMC command issued to partition VIO2102 failed . The partition command is: migmgr -f get_adapter -t vscsi -s U9117.MMC.6583EEB-V2-C38 -w 13857705817653313572 -W 13857705817653313573 -d 2 The RMC return code is: 0 The OS command return code is: 82 The OS standard out is:, From: Christof Schmitt For ports, zfcp gets the DID from the FC nameserver and tries to open the port. If the open succeeds, zfcp compares the WWPN from the nameserver with the WWPN in the PLOGI payload. In case of a mismatch, zfcp assumes that the DID of the port just changed and we opened the wrong port.
FC_DISC_DBG(disc, GPN _FT response too short, len %dn, 536: fr_len) 537: event = DISC_EV_ FAILED 538} else if (ntohs(cp->ct_cmd) == FC_FS_ACC) {539: 540 /* Accepted, parse the response. */ 541: len-= sizeof(*cp) 542: error = fc_disc_ gpn _ft_parse(disc, cp + 1, len) 543} else if (ntohs(cp->ct_cmd) == FC_FS_RJT) {544: FC_DISC_DBG(disc, GPN _FT rejected reason %x exp %x , ZFCP_FC_ GPN _FT_MAX_SIZE: ZFCP_FC_CT_SIZE_PAGE if (fc_host_port_type (adapter-> scsi_host)!= FC_PORTTYPE_NPORT && fc_host_port_type (adapter-> scsi_host)!= FC_PORTTYPE_NPIV) return if (zfcp_fc_wka_port_get (& adapter-> gs-> ds)) return fc_req = zfcp_fc_alloc_sg_env if (! fc_req) goto out for (i = 0 i gpn _ft (fc_req, adapter, max_bytes) if (! ret) {ret = zfcp_fc_eval_ gpn.
This could be done from an untrusted guest VM. (bnc#1079384). – CVE-2017-18174: In the amd_gpio_remove function in drivers/pinctrl/pinctrl-amd.c calls the pinctrl_unregister function, which.
HSCL400A There was a problem running the VIOS command. HSCLA29A The RMC command issued to partition VIO2102 failed . The partition command is: migmgr -f get_adapter -t vscsi -s U9117.MMC.6583EEB-V2-C38 -w 13857705817653313572 -W 13857705817653313573 -d 2 The RMC return code is: 0 The OS command return code is: 82 The OS standard out is:, Hello, after a system crash on a linux-box, the jfs-disk failed on fsck, so I got the freshest jfs-util and did a manual fsck: —– $> fsck.jfs -nv –omit_journal_replay /dev/hdd1 fsck.jfs version 1.1.13, 17-Jul-2008 processing started: 9/13/2008 20.6.3 The current device is: /dev/hdd1 Open(…READONLY…) returned rc = 0 Primary superblock is valid.
